The ET115-002 adaptable water softener or water filtration air gap is engineered to offer an accessible approach to integrate an air gap into a 1-1/2-inch standpipe drain. This air gap can be linked with rigid PVC tubing or flexible piping using adapters. Its distinctive construction ensures a totally safeguarded air gap with no risk of water splashing outward. The inlet accommodates 3/4-inch threaded PVC pipes or attachments. The ET115-002 features a minimum flow capacity of 0.5 gallons per minute (GPM) and a maximum flow capacity of 9 gallons per minute (GPM). The lowest and highest flow rates through an air gap are defined as the points where water does not spray outside. At both minimum and maximum capacities, the exterior of the air gap remains dry. It is straightforward to operate, simple to install, and requires minimal maintenance. The ET115-002 air gap is certified by UPC and IPC.
❤ FLOW RATE: The ET115-002 features a minimum flow rate of 0.5 gallons per minute (GPM) and a maximum flow rate of 9 gallons per minute (GPM). Both minimum and maximum rates through an air gap are the specific flows at which water remains contained within without splashing out. At either flow rate, the exterior of the air gap stays dry.
❤ SIMPLE INSTALLATION: The ET115-002 is crafted for linking discharge water tubing originating from a water softener system to a drainage line. Its 3/4-inch MIPT threaded inlet works with a 3/4-inch threaded PVC pipe or the 3/4-inch threaded ET170-XXX series air gap adapters (models -009 to -014). The ET115-002 can be fitted onto a 1-1/2 inches OD standpipe or a 2 inches OD standpipe utilizing 2-inch couplers. The ET115-002 may be pressure-fitted or adhered to a plastic standpipe.
❤ STANDPIPE CONNECTION: The ET115-002 connects with a 1-1/2 inches OD standpipe or a 2 inches OD standpipe using couplers. The air gap can handle a flow capacity of 15 gallons/minute.
❤ DRY OPERATION: The ET115-002 includes a splash guard to ensure a dry operational state. It is also advised to position the ET115-002 at least 18 inches above the P-Trap to prevent any water from splashing back out of the air gap.
❤ CERTIFICATION: The ET115-002 is compliant with UPC (Uniform Plumbing Code) and IPC (International Plumbing Code) requirements. Testing takes place for each production batch to guarantee consistent functionality.
Customers say
Customers report that the air gap fitting operates effectively, with one individual highlighting its compliance with code standards for condensate drain air gaps. The product manages water flow impressively, with a customer remarking it’s ideal for their Aquasure Water Softener.
